Feeding sheave maximum pulling loads (lb)
Merchant-supplied ratings. Angle of pull: 15°–90°. These are cable pulling limits, not resultant sheave forces. Verify the complete rigging setup and product instructions. Between listed angles, the simulator uses the next higher angle’s lower pulling limit. It assumes full cable tension at each sheave; it does not estimate friction losses.
| Angle | 441-2 | 441-2-1/2 | 441-3 | 441-3-1/2 | 441-4 | 441-5 | 441-6 |
|---|---|---|---|---|---|---|---|
| 15° | 1,750 | 1,900 | 6,050 | 8,000 | 8,000 | 8,000 | 8,000 |
| 30° | 900 | 1,000 | 3,150 | 5,500 | 7,000 | 8,000 | 8,000 |
| 45° | 650 | 700 | 2,200 | 3,550 | 5,200 | 7,400 | 7,400 |
| 60° | 500 | 550 | 1,800 | 2,900 | 4,200 | 6,000 | 6,000 |
| 75° | 450 | 500 | 1,600 | 2,600 | 3,650 | 5,500 | 5,500 |
| 90° | 450 | 500 | 1,550 | 2,500 | 3,500 | 5,250 | 5,250 |
The 3½-inch model is included in this reference table; a matching 3D model is not currently available in the simulator.